牛牛在线精品视频(正),中文字幕亚洲综合久久青草,秋霞无码久久久精品

DI-9M-8�ձ�˼�_��Ť��yԇ�x

Management of electrik screw driver

��Torque Meter �@DI-9M-8/08

DI-9 series is most suitable for checkingcontrolling the torque of Electric ScrewdriverTorque Driver.

upgrade�@The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds.

�@

The best for everyday check of an electric driver Wide measurement range (0 - 8000digit), it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint (PAT.P).

Specification	DI-9M-8	DI-9M-08
Measuring range	0.020-8 N�m	2.0-800 mN�m
	0.20�`80 kgf�Ecm	0.020�`8 kgf�Ecm
	0.20�`70 lbf�Ein	0.020�`7 lbf�Ein
Accuracy	�}0.5% (499 digit or less �}3digit)
Display	The 4 figures digital display of LCD
The measurement direction	CW-CCW (rightleft)
Zero return by one touch	Return to zero by pressing clear button.
Measurement Mode	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
Highlow limits judging function	Highlow value are measurement within the limits,can be set up.
Real-time Output	Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum,the average value display	The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels.
Data Output	ASCII format (baud rate 19200)
Auto power save	10 minutes no use, automatically switch off.
Power supply	Ni-Cd chargeable battery 1.2V �~ 5cells 700mAh
Charging time	About 3hours
Continuous working time	About 12hours
clearance	It is a display clearance in set-up time. (0.1 - 3.0 sec)
Socket size	�� 20mm/ ��9.5mm
Dimension / Weight	W:160�~D:125�~H:55 / About 1kg
Recommend buffer accessories	Measuring joint OW-20/OW-60	Measuring joint OW-025/OW-10
	Cube (with a 5th page screw hole)�@20x20x20 �@(M2.6/M3/M4/M5/M6 Tap processing)
	AC/DC adaptor
	Exclusive receipt case
	An inspection report, a proofreading certificate, a traceability system figure

��Do not use for measurement of impact tool.Do not apply more than the specified torque.

�� MEASURING JOINT OW series
	Since our company developed the buffer with little influence of fricative, stable measurement could be performed Moreover ,it does not need to reverse-rotate at the time of measurement, work efficiency improved.

Specification		Type
Specification		OW-025	OW-10	OW-20	OW-60
Measuring range N�m		0.25	1	2	6
Mechanical life �itimes�j		10,000	8,000	5,000	5,000
Outer diameter size �imm�j	Bit engagement part (screw part)	M2.6 cross recess screw	M3 cross recess screw	M4 cross recess screw	M6 cross recess screw
	Bit engagement part (screw part)	The standard screw is cross recess screw but they may be altered as necessary
	Outside diameter	��28	��32	��32	��38
	Height	44	51	51	69
	�hnstallation	20square �~4(t)

CD-10M�ձ�˼�_��Ť��yԇ�x

Management of electric screw driver

��Torque Meter �@CD-100M/10M

upgrade�@The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds.

Specification	CD�\|100M	CD�\|10M
Measuring range (at the time of Track)	0.10�`10�@N�Em	1.0�`100�@��N�Em�@
	1.0�`100 kgf�Ecm	0.10�`10 kgf�Ecm
	1.0�`90 lbf�Ein	0.10�`9 lbf�Ein
Accuracy	�}0.5��iF/S�j(199 or less digit�}1digit)
Display	The 3.5 figures digital display of LCD
The measurement direction	CW-CCW (rightleft)
Measurement Mode	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
Highlow limits judging function	Highlow value are measurement within the limits,can be set up.
Real-time Output	Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum,the average value display	The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels.
Automatic Clearance	Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero	A clear button is pushedit is a zero.�@ Data is outputed.
Data output	ASCII format (baud rate 19200)
Power supply	Ni-Cd chargeable battery 1.2V�~5cells 700mAh
Auto power save	10 minutes no use, automatically switch off.
Charging time	About 3 hours
Continunous working time	About 12 hours
Socket fit mouth	�� 20mm/ ��9.5mm
Weight	Abbreviation 1 kg
Outside dimension	160�iW�j�~125�iD�j�~55�iH�j
Attachment	Measurement joint�@SJ50/SJ10K	Measurement joint�@SJ10
Accessories (one piece each)	AC/DC adaptor
	Exclusive receipt case
	An inspection report, a proofreading certificate, traceability system figure

SJ50	SJ10	About an adapter ��measurement joint�@SJ�iPAT.P�j��
		It does not decompose, even if it rewinds joint too much Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method. Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort.

CD-10��CD-100˼�_��Ť��yԇ�x

�ձ�˼�_��Ť��yԇ�x

��̖	DI-9-08	DI-9-08	CD-10	CD-100
�yԇ��	0.1~800mN.m 0.001~8kgf.cm 0.001~7Lbf.in	0.001~8N.m 0.01~80kgf.cm 0.01~70Lbf.in	0.001~1N.m 0.01~10kgf.cm 0.01~9Lbf.in	0.01~10N.m 0.1~100kgf.cm 0.1~90Lbf.in
�`��	±0.5%		±0.5%
��	LC:LCDҺ��@ʾ��RS��RS232ݔ��ڣ�PO��Դ�Ԅ��P�]��ܣ�IO��O��Ԅ��
��ͳߴ�	155W×125D×55H
��	�y��^OW025/OW10�� b��/AC��һ��	�y��^OW020/OW60�� b��/AC��һ��	�B��^SJ10/��b ��/AC��һ��	�B��^SJ50��b�� /AC��һ��

Ҏ��		CD-100	CD-10
�yԇ��		3.0-800.0 mNm	0.030-8.000 N��
��		8000-500 digit 0.5% 499-30 digit within3digit
�@ʾ��λ		lbfin-kgfcm-Nm
�w��		Return to zero by pressing clear button.
Data spec.	Data output	Based on RS232C Baud rate:9600
Power supply	Auto power off	�Ԅ��Դ�P�] 10 min.
	Battery drive	Ni-Cd 1.2V 5cells1200mAh
��늕r�g		8hrs.
�B�m��늕r�g		20hrs.
�ԄӚw��		��ԄӚw��b��
�ߴ�		W:155D:125H:30 / 1kg
��		Measuring joint SJ10/50	Measuring joint SJ10

CD-10��CD-100�ձ�˼�_��Ť��yԇ�x

�ձ�˼�_��Ť��yԇ�x

��̖	DI-9-08	DI-9-08	CD-10	CD-100
�yԇ��	0.1~800mN.m0.001~8kgf.cm0.001~7Lbf.in	0.001~8N.m0.01~80kgf.cm0.01~70Lbf.in	0.001~1N.m0.01~10kgf.cm0.01~9Lbf.in	0.01~10N.m0.1~100kgf.cm0.1~90Lbf.in
�`��	��0.5%		��0.5%
��	LC:LCDҺ��@ʾ��RS��RS232ݔ��ڣ�PO��Դ�Ԅ��P�]��ܣ�IO��O��Ԅ��
��ͳߴ�	155W��125D��55H
��	�y��^OW025/OW10��b��/AC��һ��	�y��^OW020/OW60��b��/AC��һ��	�B��^SJ10/��b��/AC��һ��	�B��^SJ50��b��/AC��һ��

Ҏ��		CD-100	CD-10
�yԇ��		3.0-800.0 mNm	0.030-8.000 N��
��		8000-500 digit 0.5% 499-30 digit within3digit
�@ʾ��λ		lbfin-kgfcm-Nm
�w��		Return to zero by pressing clear button.
Data spec.	Data output	Based on RS232C Baud rate:9600
Power supply	Auto power off	�Ԅ��Դ�P�] 10 min.
	Battery drive	Ni-Cd 1.2V 5cells1200mAh
��늕r�g		8hrs.
�B�m��늕r�g		20hrs.
�ԄӚw��		��ԄӚw��b��
�ߴ�		W:155D:125H:30 / 1kg
��		Measuring jointSJ10/50	Measuring jointSJ10

DI-IM-IP200�ձ�˼�_��Ť��yԇ�x

Management of air tool / oil pulse tool

��Torque Tester �@DI-1M-IP�@series

Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features ��Blow counter. The total number of blows within fixed timetorque measured value are displayed. �� Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. ��RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) �� It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		�c�h-�P�l-�h�o�T�O	�c�h-�P�l-�h�o�Q�O�O	�c�h-�P�l-�h�o�T�O�O
Measuring range (at the time of Track)		0.30�`50 N�m 3.0�`500 kgf�Ecm 3.0�`430 lbf�Ein	3.0�`200 N�m 30�`2000 kgf�Ecm 30�`1800 lbf�Ein	3.0�`500 N�m 30�`5000 kgf�Ecm 30�`4500 lbf�Ein
Peak down Operating range		0.70N?/span>m�`, 7.0kgf�Ecm/ lbf�Ein�`	7.0N?/span>m�`, 70kgf�Ecm/ lbf�Ein�`
Accuracy		�}0.5��iF/S�j(499 or less digit�}3digit)
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down pointhold.
Display zero clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity (baud rate 9600)
Power supply		Ni-Cd chargeable battery 1.2V�~5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part�@Weight		About 600g
Detection part�@Weight		about 600g	about 1kg	about 2.5kg
Meter part�@Outside size		146(W)�~115(D)�~48(H) �iIt does not contain by the projection part�j
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		Attache case	�\	�\
		AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
		An inspection report, a proofreading certificate, traceability system figure

Detection machine size figure				Detection machine outside figure
Form	�h�o�T�O	�h�o�Q�O�O	�h�o�T�O�O
�`	��50	��60	��80
�a	63	73	99
�b	10	10	15.5
�c	��90	��110	��140
�d	��74	��90	��116
�e(Three division)	��6.3	��8.3	��10.5
�f�@(Socket intuition affinity)	9.5��	12.7��	19��
Weight	632g	1.8kg	3kg

DI-9M-8�ձ�˼�_��Ť��yԇ�x

Management of electrik screw driver

��Torque Meter �@DI-9M-8/08

DI-9 series is most suitable for checkingcontrolling the torque of Electric ScrewdriverTorque Driver.

upgrade�@The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds.

�@

The best for everyday check of an electric driver Wide measurement range (0 - 8000digit), it corresponds to various set torques Can measure without inversion/ rolling-back work efficiently by OW joint (PAT.P).

Specification	DI-9M-8	DI-9M-08
Measuring range	0.020-8 N�m	2.0-800 mN�m
	0.20�`80 kgf�Ecm	0.020�`8 kgf�Ecm
	0.20�`70 lbf�Ein	0.020�`7 lbf�Ein
Accuracy	�}0.5% (499 digit or less �}3digit)
Display	The 4 figures digital display of LCD
The measurement direction	CW-CCW (rightleft)
Zero return by one touch	Return to zero by pressing clear button.
Measurement Mode	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
Highlow limits judging function	Highlow value are measurement within the limits,can be set up.
Real-time Output	Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum,the average value display	The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels.
Data Output	ASCII format (baud rate 19200)
Auto power save	10 minutes no use, automatically switch off.
Power supply	Ni-Cd chargeable battery 1.2V �~ 5cells 700mAh
Charging time	About 3hours
Continuous working time	About 12hours
clearance	It is a display clearance in set-up time. (0.1 - 3.0 sec)
Socket size	�� 20mm/ ��9.5mm
Dimension / Weight	W:160�~D:125�~H:55 / About 1kg
Recommend buffer accessories	Measuring joint OW-20/OW-60	Measuring joint OW-025/OW-10
	Cube (with a 5th page screw hole)�@20x20x20 �@(M2.6/M3/M4/M5/M6 Tap processing)
	AC/DC adaptor
	Exclusive receipt case
	An inspection report, a proofreading certificate, a traceability system figure

��Do not use for measurement of impact tool.Do not apply more than the specified torque.

�� MEASURING JOINT OW series
	Since our company developed the buffer with little influence of fricative, stable measurement could be performed Moreover ,it does not need to reverse-rotate at the time of measurement, work efficiency improved.

Specification		Type
Specification		OW-025	OW-10	OW-20	OW-60
Measuring range N�m		0.25	1	2	6
Mechanical life �itimes�j		10,000	8,000	5,000	5,000
Outer diameter size �imm�j	Bit engagement part (screw part)	M2.6 cross recess screw	M3 cross recess screw	M4 cross recess screw	M6 cross recess screw
	Bit engagement part (screw part)	The standard screw is cross recess screw but they may be altered as necessary
	Outside diameter	��28	��32	��32	��38
	Height	44	51	51	69
	�hnstallation	20square �~4(t)

CD-10M�ձ�˼�_��Ť��yԇ�x

Management of electric screw driver

��Torque Meter �@CD-100M/10M

upgrade�@The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds.

Specification	CD�\|100M	CD�\|10M
Measuring range (at the time of Track)	0.10�`10�@N�Em	1.0�`100�@��N�Em�@
	1.0�`100 kgf�Ecm	0.10�`10 kgf�Ecm
	1.0�`90 lbf�Ein	0.10�`9 lbf�Ein
Accuracy	�}0.5��iF/S�j(199 or less digit�}1digit)
Display	The 3.5 figures digital display of LCD
The measurement direction	CW-CCW (rightleft)
Measurement Mode	Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
Highlow limits judging function	Highlow value are measurement within the limits,can be set up.
Real-time Output	Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum,the average value display	The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels.
Automatic Clearance	Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero	A clear button is pushedit is a zero.�@ Data is outputed.
Data output	ASCII format (baud rate 19200)
Power supply	Ni-Cd chargeable battery 1.2V�~5cells 700mAh
Auto power save	10 minutes no use, automatically switch off.
Charging time	About 3 hours
Continunous working time	About 12 hours
Socket fit mouth	�� 20mm/ ��9.5mm
Weight	Abbreviation 1 kg
Outside dimension	160�iW�j�~125�iD�j�~55�iH�j
Attachment	Measurement joint�@SJ50/SJ10K	Measurement joint�@SJ10
Accessories (one piece each)	AC/DC adaptor
	Exclusive receipt case
	An inspection report, a proofreading certificate, traceability system figure

SJ50	SJ10	About an adapter ��measurement joint�@SJ�iPAT.P�j��
		It does not decompose, even if it rewinds joint too much Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method. Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort.

CD-10/CD-100�Ϻ��v�@��Ť��yԇ�x��˼�_��Ť��yԇ�x

�ձ�˼�_��CD-10/CD-100��Ť��yԇ�x

Ԕ��B

��P�aƷ��Q:Ť��,��@Ť��,Ť��Ӝyԇ�x,Ť��әz�y�x,Ť��Ӌ

Ʒ��Q�� Ť��yԇ�xcd-10/cd-100 �� ̣� ˼�_(cedar) �aƷ�N� �y��x��

�ձ�˼�_��Ť��yԇ�x

��̖

DI-9-08

CD-10

CD-100

�yԇ��

0.1~800mn.m0.001~8kgf.cm0.001~7lbf.in

0.001~8n.m0.01~80kgf.cm0.01~70lbf.in

0.001~1n.m0.01~10kgf.cm0.01~9lbf.in

0.01~10n.m0.1~100kgf.cm0.1~90lbf.in

�`��

±0.5%

��

lc:lcdҺ��@ʾ��rs��rs232ݔ��ڣ�po��Դ�Ԅ��P�]��ܣ�io��O��Ԅ��

��ͳߴ�

155(w)×125(d)×55(h)

��

�y��^ow025/ow10��b��/ac��һ��

�y��^ow020/ow60��b��/ac��һ��

�B��^sj10/��b��/ac��һ��

�B��^sj50��b��/ac��һ��

ԓ��˾�aƷ��� ��ď��Ӌ �|��Ť�� ؝��ӛ䛃x Ƥ��Ӌ ��Ӌ �y��x�� h��yԇ�x�� y��߼��o�� Ť�� y�� C�� W�x�� x��x��

DI-9-08/DI-9_8�Ϻ��Ť��yԇ�x��˼�_��Ť��yԇ�x

�ձ�˼�_��DI-9-08/DI-9_8��Ť��yԇ�x

Ԕ��B

��P�aƷ��Q:Ť��,��@Ť��,Ť��Ӝyԇ�x,Ť��әz�y�x,Ť��Ӌ

�aƷ��Q�� Ť��yԇ�xDI-9-08/DI-9-08 �� ̣� ˼�_(CEDAR) �aƷ�N� �y��x��

�ձ�˼�_��Ť��yԇ�x

��̖	DI-9-08	DI-9-08	CD-10	CD-100
�yԇ��	0.1~800mn.m0.001~8kgf.cm0.001~7lbf.in	0.001~8n.m0.01~80kgf.cm0.01~70lbf.in	0.001~1n.m0.01~10kgf.cm0.01~9lbf.in	0.01~10n.m0.1~100kgf.cm0.1~90lbf.in
�`��	±0.5%		±0.5%
��	lc:lcdҺ��@ʾ��rs��rs232ݔ��ڣ�po��Դ�Ԅ��P�]��ܣ�io��O��Ԅ��
��ͳߴ�	155(w)×125(d)×55(h)
��	�y��^ow025/ow10��b��/ac��һ��	�y��^ow020/ow60��b��/ac��һ��	�B��^sj10/��b��/ac��һ��	�B��^sj50��b��/ac��һ��

ԓ��˾�aƷ��� ��ď��Ӌ �|��Ť�� ؝��ӛ䛃x Ƥ��Ӌ ��Ӌ �y��x�� h��yԇ�x�� y��߼��o�� Ť�� y�� C�� W�x�� x��x��

DI-9-08�ձ�CEDAR˼�_��Ť��yԇ�x

�ձ�˼�_��Ť��yԇ�x

��̖	DI-9-08	DI-9-08	CD-10	CD-100
�yԇ��	0.1~800mN.m 0.001~8kgf.cm 0.001~7Lbf.in	0.001~8N.m 0.01~80kgf.cm 0.01~70Lbf.in	0.001~1N.m 0.01~10kgf.cm 0.01~9Lbf.in	0.01~10N.m 0.1~100kgf.cm 0.1~90Lbf.in
�`��	±0.5%		±0.5%
��	LC:LCDҺ��@ʾ��RS��RS232ݔ��ڣ�PO��Դ�Ԅ��P�]��ܣ�IO��O��Ԅ��
��ͳߴ�	155W×125D×55H
��	�y��^OW025/OW10�� b��/AC��һ��	�y��^OW020/OW60�� b��/AC��һ��	�B��^SJ10/��b ��/AC��һ��	�B��^SJ50��b�� /AC��һ��

尤物AV无码色AV无码麻豆_我扒开老师内裤我爽了一夜_久久久久亚洲AV成人网址_一一级黄色片_在线观看高清av_农村一级黄色片

DI-9M-8�ձ�˼�_��Ť��yԇ�x

CD-10M�ձ�˼�_��Ť��yԇ�x

CD-10��CD-100˼�_��Ť��yԇ�x

CD-10��CD-100�ձ�˼�_��Ť��yԇ�x

DI-IM-IP200�ձ�˼�_��Ť��yԇ�x

DI-9M-8�ձ�˼�_��Ť��yԇ�x

CD-10M�ձ�˼�_��Ť��yԇ�x

CD-10/CD-100�Ϻ��v�@��Ť��yԇ�x��˼�_��Ť��yԇ�x

DI-9-08/DI-9_8�Ϻ��Ť��yԇ�x��˼�_��Ť��yԇ�x

DI-9-08�ձ�CEDAR˼�_��Ť��yԇ�x

��®aƷ